Energetiq LDTLS Products
LDTLS Laser Driven Tunable Light Sources

Laser-Driven Tunable Light Sources

High Brightness, Broadband with Fiber-Coupled Output

The Laser-Driven Tunable Light Source (LDTLS™) is a compact, fully integrated and highly stable tunable broadband light source based on proven Laser-Driven Light Source (LDLS™) technology. The LDTLS™ family utilizes the EQ-9, EQ-77 and EQ-400 LDLS™ broadband sources and features the highest brightness and output flux available in a tunable broadband light source.

Designed with high throughput applications in mind, the LDTLS can be run continuously and has an extremely long bulb lifetime of more than 9,000 hours. It has high stability, very low noise and is coupled with a precision high-performance monochromator for accurate wavelength selection and repeatable light output across the broad range of 400nm-1100nm.

The spectral resolution can be customized for application specific purposes and ranges in bandwidth from 1nm to 10nm. The fiber coupled output is both flexible and convenient for delivering wavelength selected light precisely where it is needed.


EQ77 LDLS

LDTLS™ for Sophisticated Optical Sensors



Energetiq LDTLS™ Products

Compare characteristics and specifications of our Laser-Driven Tunable Light Source products.

LDTLS

LDTLS-9 LDTLS-77 LDTLS-400

MODEL

EQ-9-TLS

EQ-77-TLS

EQ-400-TLS

Operating Wavelength Range

400nm–1100nm 400nm–1100nm 750nm–1100nm

Wavelength Accuracy

+/- 0.5nm +/- 0.5nm +/- 0.5nm

Spectral Resolution

User selectable: 1.0nm-8.0nm Factory pre-set: 1.0nm-8.0nm Factory pre-set: 4.0nm-8.0nm

Scan speed

< 15ms for a 2nm step < 15ms for a 2nm step < 15ms for a 2nm step

Typical In-band Flux
(For ~6.5nm FWHM)

400nm: 1mW
600nm: 1mW
750nm: 0.4mW
1000nm: 0.2mW
400nm: 4.5mW
600nm: 3.0mW
750nm: 2.0mW
1000nm: 0.75mW
400nm: N/A
600nm: N/A
750nm: 3.0mW
1000nm: 2.0mW

Optical Output Interface

Optical fiber output via SMA
connector, NA = 0.39

Optical fiber output via SMA
connector, NA = 0.39

Optical fiber output via SMA
connector, NA = 0.39

Lamphead
Dimensions

Controller
Dimensions

35.6 x 27 x 23.3 cm
14 x 10.7 x 9.17 in

N/A

26.6 x 43.2 x 22.2 cm
10.5 x 17 x 8.7 in

15.2 x 25 x 13.2 cm
6 x 9.8 x 5.2 in

34.9 x 33 x 21.6 cm
13.7 x 13 x 8.5 in

133 x 483 x 584 mm
5.2 x 19.0 x 23.0 in

Facility Requirements

Electrical

100-240 VAC, 50/60 Hz 100-240 VAC, 50/60 Hz 200-240 VAC, 50/60 Hz

Cooling System

Active air-cooling 1.0 Liter/min (0.27gal/min)
(available from Energetiq)
3.0-4.0 Liter/min (0.81-1.1 gal/min) (available from Energetiq)

Purge Nitrogen

Not Required 0.4 Liter/min (recommended) 0.7 Liter/min (recommended)

Compliance

CE Mark, Class 1 CE Mark, Class 1 CE Mark, Class 4

 

About Energetiq

Company Information

Careers at Energetiq

Privacy Policy

Site Map

Contact

LDLS™ Products

EQ-99X

EQ-99XFC

EQ-99CAL

EQ-77

EQ-400

EQ-9

Selection Guide

OEM Solutions

LDTLS Products

LDTLS

EUV/SXR Products

EQ-10

EQ-10HR

EQ-10HP

EQ-10SXR

Resources

Data Sheets

Technical Notes

Application Notes

Published Papers

Published Articles

Product Images

Product Videos

Industry Applications

Semiconductor,
Flat Panel Displays
and Data Storage

Life & Material Sciences

Research

© Copyright 2018 Energetiq Technology, Inc.